Why you should use our SU Puller

SU-91 Puller for 1-needle Machine SU-91L Puller for 1-needle Machine with lifting device SU-92 Puller for 2-needle Machine SU-92L Puller for 2-needle Machine with lifting device SU-93 Puller for Feed-off-the-Arm Machine
Why should you use our SU Puller ?
	EASY & RECOVERABLE INSTALLATION Installation of SU puller is extremely easy and simple. A Plate with all possible screw hole is replaced the original machine rear cover. Fixing bracket is fixed on this plate. No damage will be caused on the sewing machine. Installation is recoverable. SU-puller can be installed on other machine
		5-ROLLER CLUTCH Special designed 5-Roller Clutch can support shorter stitch length. (Over 24 stitches in 1 inch)
	ZERO DISTANCE SU91 puller is beyond the presser bar. It never gets closer to the presser feet. Distance is a significant factor for pulling performance. Closer the puller, better the pulling performance. Zero distance can make curve pulling possible, other puller only can support straight sewing.
		PULL REGULATOR Pulling length can be adjusted very easily. The max. and min. pulling length is also changeable by using a longer or shorter connection rod.
	SPRING TYPE LOWER ROLLER A normal lower puller is provide for each set of SU92 roller. Beside, a special designed spring type lower puller is optional. It make SU puller possible to pass multi-ply overlapped or uneven section.
		CURVED WAISTBAND PULLER SU-92 can support Flared Puller set which is specially design for Curved Waist-band.
	BELT TENSION REGULATOR Belt Tension is adjustable. It can solve the problem caused by Position change, Different Belt Length, Re-installation on other machine.