SU-92P   Plastic Puller for 2-needle Machine
  SU-92M  Steel Gear Puller for 2-needle Machine

chick the below
   Demo: SU-92 on Juki 2-needle Machine
   Demo: SU-92 on Brother 2-needle Machine









¡@


  • EASY & RECOVERABLE INSTALLATION:  Installation of SU puller is extremely easy and simple. A Plate with all possible screw hole is replaced the original machine rear cover. Fixing bracket is fixed on this plate.

  • No damage will be caused on the sewing machine.

  • RECOVERABLE INSTALLATION. SU-puller can be install on other machine. 

  • 5-ROLLER CLUTCH can support shorter stitch length. (Over 24 stitches in 1 inch)

  • Special designed gear and bearing can minimize the extra burden on the sewing machine. Su-puller is very light and easy.

  • Belt's tension is adjustable.

  • Pulling  length is adjustable.

¡@




    For SU-92 Series
Given Parts
0079P 0079S 9285


 Upper Puller
 Plastic smooth roller 


Upper Puller
 Steel Gear

Standard supplementary puller
¡@
¡@
Optional Parts

9289P  


¡@

  
     
Spring Type Lower Supplementary Roller
      (Flared Plastic Roller)

      It is mainly for curved waistband,
      fixed on the table behind the needle.

9289PCU


¡@

  

        
 Upper Puller Assembly

   Flared, Rouletted Steel Roller. It is mainly for curved waistband.  
¡@
9279CU 9279P 9279S



  Upper Puller Assembly
(Flared, Roulette Steel Roller)
It is mainly for curved waistband.
¡@


 Upper Puller Assembly
(Smooth Plastic Roller)


Upper Puller Assembly
(Steel Puller Gear)
0079CU 0089P 0089PCU

  Upper Puller
Flared, Rouletted
(for Curved Waistband)
¡@


Lower supplementary roller
 Plastic smooth roller
¡@
Lower supplementary
roller
Flared, Rouletted
(for Curved Waistband)
¡@