ZERO DISTANCE:
SU91 puller is beyond the presser bar. It is never get closer to the
presser feet. Distance is a significant factor for pulling
performance. Closer the puller, better the pulling performance. Zero
distance can make curve pulling possible, other puller only can
support straight sewing.
EASY & RECOVERABLE INSTALLATION: Installation of SU puller
is extremely easy and simple. A Plate with all possible screw hole is
replaced the original machine rear cover. Fixing bracket is fixed on
this plate.
No
damage will be caused on the sewing machine.
RECOVERABLE INSTALLATION. SU-puller can be install on other
machine.
5-ROLLER CLUTCH
can support shorter stitch length. (Over 24 stitches in 1 inch)
Special
designed gear and bearing can minimize the extra burden on the sewing
machine. Su-puller is very light and easy.
Belt's
tension is adjustable.
Pulling
length is adjustable.
For SU-91 Series
Given Parts
91-034
91-035
20mm Plastic smooth roller
¡@
20mm Steel pulling gear
¡@
¡@
Reverse-feed Switch - Lifting
(For
SU-91L only)
A Lifting Switch is provided to be installed
on the Reverse-feed control lever. The puller will lift upwhen reverse stitching.
¡@
Knee Lifting Switch - Lifting
(For SU-91L only)
Another Lifting Switch is provided to be
installedon the knee switch of
presser foot lifting. The puller will life up together with
the presser foot.
¡@
¡@
Optional Parts
P91R
P91L
P91
P91F
Special design
presser feet
with Left Compensating Guide
Size: 1/32", 1/16", 1/8", 3/16",
1/4"
Special design
presserfeetwith Right Compensating Guide
Size: 1/32", 1/16", 1/8", 3/16",
1/4"
¡@
Special design
presser feet
for
puller
Special design
presser feet for Hemming Use
Size: 3/4", 1", 1-1/4"